Product Code: DS1
Other languages
English · Français · Deutsch · Español · Italiano
Installation and operation
For setup and day-to-day use, see the Docking Station Installation and Operating Instructions.
Robot compliance
When used with a Mesmer Desktop Gen 3 robot, also read the Mesmer Desktop Gen 3 — Legal and Compliance Leaflet.
HEALTH AND SAFETY
Before using this product, carefully read this manual and retain it for future reference.
Parents and guardians of children should read this manual and make sure that
children follow all safety precautions.
This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury.
- Stop use and disconnect the AC power cord immediately if the product functions in an abnormal manner, produces unusual sounds or smells, or becomes too hot to touch.
- Electrical Shock: Do not attempt to modify or interfere with the electrical connections or circuitry. Do not attempt to power the product from any source other than the manufacturer-supplied power supply.
- Young Children: Keep the product and cables out of reach of young children. Cables pose a strangulation and trip hazard.
| ⚠️ | Disconnect from Power Ensure the docking station is disconnected from the power supply before attempting to move, maintain or adjust any part of it. |
|---|---|
| ⚠️ | Electrical Shock Do not attempt to modify or otherwise interfere with the electrical connections and/or circuitry of the docking station. Do not attempt to power the docking station from any other source than the manufacturer-supplied power supply. Any such modifications or interference may lead to dangerous situations that endanger the life of operators or other persons in the vicinity of the docking station. Such modifications or interference will void any manufacturer warranty for the docking station. |
| ℹ️ | Docking Station Condition Only use the docking station if it is in good mechanical and electrical order. Never attempt to install or use a docking station that has been subject to damage, including but not limited to: contamination by liquids contamination by dust / swarf / particulates mechanical impacts / drops etc. exposure to extreme temperatures or humidities If in doubt, always refrain from using the docking station and contact the manufacturer for advice. |
| ℹ️ | Storage and Maintenance Store the docking station in a dry, clean, and dust-free environment. Keep the docking station in an area with stable temperature and humidity, away from extreme conditions. Clean the docking station using a small amount of isopropyl alcohol (maximum 70% alcohol) applied to a clean, lint-free cloth, OR commercially available pre-impregnated isopropyl alcohol wipes (max. 70% alcohol) |
SET UP AND HANDLING
- Always ensure good ventilation. Do not use it in a closed cabinet where heat may build up.
- Do not touch the product during an electrical storm.
- Do not place on surfaces that are unstable, tilted, or subject to vibration.
SPECIFICATIONS
Design and specifications are subject to change without notice. Depending on the firmware version in use, the docking station may operate differently than described in this manual.
| Height | 28mm |
|---|---|
| Width | 128mm |
| Depth | 121mm |
| Weight | 320g |
| Electrical Specification | 24 Vdc, 200W External PSU 100-240 VAC 50-60Hz (Supplied with robot) |
| Connectivity | Wired Ethernet RJ45 USB 3.2 3.5 mm Audio Out/In |
COMPLIANCE INFORMATION
PRODUCT DISPOSAL
This symbol indicates that the product or batteries should not be disposed of as general household waste in the EU, UK, or Türkiye. Please dispose of them via an authorised collection facility.
EU REACH and RoHS
Complies with the REACH regulatory framework.
Complies with the EU RoHS Directive.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISED CANADA COMPLIANCE
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAN ICES-003 (B) / NMB-003 (B)